How to install rear view mirror on VW?

Installing a rear view mirror in your Volkswagen might seem like a straightforward task, but it’s essential to perform this installation correctly for both safety and legal reasons. Each step must be executed meticulously to ensure the mirror is securely fastened and properly aligned. This comprehensive guide will walk you through the process of installing a new or replacement rear view mirror in your VW, detailing the necessary tools, precautions, and step-by-step instructions.

Before You Begin

1. Gather Tools and Materials
New rear view mirror (make sure it’s compatible with your specific VW model)
Socket set or screwdriver set (depending on your car’s attachment mechanism)
Clean rag or microfiber cloth
Adhesive promoter (if using an adhesive-mounted mirror)
Alcohol wipes (to clean the mounting surface)

2. Preparation
Park your Volkswagen on a level surface and turn off the engine.
Ensure that the interior of the vehicle, specifically the windshield area, is clean and dry.
If replacing an existing mirror, remove it carefully to avoid damaging the windshield.

Step-by-Step Installation Process

Method 1: Clip-On Installation

For most modern Volkswagens, the rearview mirror clips onto the windshield:

1. Positioning: Identify the pre-existing mount or track on the windshield designed for the mirror. It’s typically located at the top center of the glass.

2. Clipping On: Carefully align the bottom clip of the mirror with the groove on the windshield. Firmly press down until the clips snap into place. Make sure the mirror is centered and.

3. Adjustment: Once installed, adjust the mirror to provide the best possible rearward visibility. Consult your owner’s manual for optimal placement guidelines.

Method 2: Screw-on Installation

Some older models or aftermarket mirrors may require screw-on installation:

1. Mounting Plate: If applicable, attach the mounting plate to the mirror assembly according to manufacturer instructions.

2. Cleaning the Windshield Area: Thoroughly clean the area where the mirror will be attached with alcohol wipes to ensure strong adhesion.

3. Attaching the Mirror: Align the mounting plate with the pre-drilled holes in the windshield. Insert screws and tighten them gently with a socket or screwdriver. Do not overtighten as it could damage the windshield.

4. Securing: Check the tightness of the screws once again after a short period to ensure they haven’t loosened due to vibrations from driving.

Method 3: Adhesive-Mounted Mirrors

In some cases, especially with newer panoramic mirrors or electrochromic mirrors, adhesive is used:

1. Clean and Prep: Clean the designated spot on the windshield thoroughly with alcohol wipes. Apply adhesive promoter to the windshield if recommended by the manufacturer.

2. Apply Adhesive: Apply the automotive-grade adhesive to the backside of the mirror’s mounting bracket following the product’s instructions.

3. Mounting: Carefully position the mirror onto the windshield and apply firm, even pressure for the recommended amount of time (usually several minutes).

4. Curing: Allow the adhesive to cure for the specified time before driving (this can range from a few hours to overnight). Do not adjust the mirror during this period.

5. Final Adjustments: After the adhesive has cured, adjust the mirror to the correct position for safe driving.


The successful installation of a rear view mirror in your Volkswagen is vital for maintaining clear lines of sight while driving. Always follow the specific instructions provided with your new mirror and refer to your vehicle’s owner’s manual for additional guidance. Regular checks to ensure the mirror remains secure are also important to guarantee continued safe operation.

Remember, if you feel unsure about any part of the process, don’t hesitate to consult a professional mechanic or visit an authorized Volkswagen dealership for assistance. Safety should always come first when dealing with critical components like your vehicle’s rear view mirror.

Scroll to Top

Send Your Inquiry Today